Home > Support > Downloads : PCTerm ControlNet EDS files Profibus GSD files

Software
updates
and
tools

Downloads

The software below is available for download.

Instructions
Microsoft Internet Explorer Users
Right click on the file you would like to retrieve and select "Save Target As" (PC) or "Download Link to Disk" (Mac).

Netscape Users
Right click on the file you would like to retrieve and select "Save Link As."

PCTerm 3.4
PCTerm is a terminal emulator for Windows-based personal computers that allows you to communicate with Unico drives and controllers. In addition to terminal emulation, the program also allows you to archive setup values, plot simple graphs of data samples, and download application software updates to the drive or controller.

Download
By downloading software from the Unico Web site, you agree to the terms of our license agreement at right. Please read it before downloading.
      804333_034.zip
      PCTerm manual (PDF)

Installation
1   Extract the contents of 804333_034.zip to a temporary
     folder on your computer.
2   Run the file Setup.exe in this folder and follow the
     instructions.
3   After installation is complete, discard the temporary
     folder created in step 1 and its contents.

ControlNet™ EDS Files
Electronic Data Sheet (EDS) files are provided for Unico's 2000 and 4000 family ControlNet™ interfaces and for the AnyBus ControlNet interface. EDS files are used by RSNetworx™ software to define and configure devices for a ControlNet™ network.

2000 Family
Use with the 320-670 and 321-812 ControlNet™ coprocessor modules for the 2000 family of drives:
      unico_s2000.eds
      unico_s2000.ico

4000 Family
There are two different versions of the 4340 and 4341 ControlNet™ Interface (CNI) modules.

Use with the 320-149 and 319-940 interface modules, which have software device addressing:
      unico_s4000_old.eds

Use with the 321-558 and 321-711 interface modules, which have switch-selectable device addressing:
      unico_s4000.eds
      unico_s4000.ico

AnyBus® ControlNet Module
Use with the AnyBus-S ControlNet module, which can be used with 1000 family drives using the 100 MHz controller, with 2000 family drives using the expandable 80 MHz controller, and with the 323-065 4000 family AnyBus interface module:
      unico_anybus.eds


Profibus GSD Files
Electronic device data sheet (GSD) files are provided for Unico's Profibus interfaces and for the AnyBus Profibus interface. GSD files are used by programming software to define and configure devices for a Profibus network.

Unico Profibus Modules
Use with the 321-023 4350 Profibus Interface module and the 320-324 and 322-404 command modules for the 2000 family of drives:
      unico.gsd

AnyBus® Profibus Module
Use with the AnyBus-S Profibus DPV1 module, which can be used with 1000 family drives using the 100 MHz controller, with 2000 family drives using the expandable 80 MHz controller, and with the 323-065 4000 family AnyBus interface module:
      unico_anybus.gsd


© Copyright 2008 Unico, Inc. All rights reserved.

End-User License Agreement
Unico expressly disclaims any warranty for the software described at left. The software is provided at no charge. By downloading the software, you agree that the software and any related documentation is provided "as is" without warranty of any kind, either express or implied, including, without limitation, the implied or stated warranties of merchantability, fitness for a particular purpose, or noninfringement. By downloading the software, you also agree that the entire risk arising out of use or performance of the software remains with you. Unico makes no warranty that the information contained in this product is complete or accurate. In no event shall Unico, it's partners, employees, or consultants, be liable for any damages whatsoever (including, without limitation, damages for loss of business profits or goodwill, business interruption, loss of business information, or any other pecuniary loss) arising out of the use of or inability to use the software or caused by errors or omissions in the information contained in the product, even if Unico has been advised of the possibility of such damages or they are foreseeable. We are also not responsible for claims by a third party. You agree not to duplicate, copy, sell, or resell any portion of the software for any commercial purpose.