5100 AC Industrial Motors

The 5100 series of motors are inverter-duty totally-enclosed, fan-cooled (TEFC) units. They are intended for operation from Unico AC drives in general-purpose applications up to 500 hp (375 kW).
The 1000 family of drives offers variable-frequency or flux vector control of induction motors as well as servo control of brushless synchronous motors.
Torque, velocity, and position control modes are available in a variety of application-specific software packages.
This series of drives is ideally suited for stand-alone operation of motors including remote outdoor locations.
The 1000 family of drives offers variable-frequency or flux vector control of induction motors as well as servo control of brushless synchronous motors.
Torque, velocity, and position control modes are available in a variety of application-specific software packages.
This series of drives is ideally suited for stand-alone operation of motors including remote outdoor locations.
For operating three-phase induction or synchronous AC motors from single-phase power sources. Operates from 220-240 or 440-480 V AC single-phase supplies for power requirements up to 125 hp (90 kW).
For operating AC induction or synchronous AC motors that must absorb regenerative power from external loads. Operates from 200-240, 380-480, or 500-600 V AC three-phase supplies for power requirements up to 150 hp (110 kW).
For applications requiring variable-frequency or flux vector control of small to large induction or synchronous AC motors. Operates from 200-240, 380-480, or 950-1200 V AC three-phase supplies for power requirements up to 2,400 hp (1,800 kW).
The 1201 provides reliable, efficient, cost-effective variable-frequency (V/Hz) or flux vector control of a wide variety of motors. It incorporates the latest technologies in insulated gate bipolar transistors (IGBTs), pulse-width modulation (PWM), and digital signal processing (DSP) to deliver optimum motor performance, complete programmability, and simplicity of operation.
The 1230 provides reliable, efficient, cost-effective variable-frequency (V/Hz) or flux vector control of a wide variety of motors. It incorporates the latest technologies in insulated gate bipolar transistors (IGBTs), pulse-width modulation (PWM), and digital signal processing (DSP) to deliver optimum motor performance, complete programmability, and simplicity of operation.
For controlling multiple AC induction and/or synchronous motors operating from a shared DC bus. Operates from 300-350, 500-700, or 700-850 V DC supplies for power requirements up to 2,200 hp (1,650 kW).
For controlling multiple DC industrial motors operating from a shared DC bus. Operates from 300-350 or 500-700 V DC supplies for power requirements up to 900 hp (675 kW).
The 2420 is an all-digital pulse-width-modulated (PWM) AC drive that provides superior control of three-phase AC motors.
The 4000 family of control products includes central processing units, serial and transducer interfaces, digital and analog I/O options, as well as card racks and power supplies.
Unico's SRP Well Report provides well operators with one-button access to surface and downhole pump DynaCards and other data stored in a well powered by a Unico artificial-lift drive.
An efficient, cost-effective way for oil and gas producers to stay connected to the most critical aspects of daily operations. Using powerful hosted enterprise architecture, the GMC® system reduces time spent manually collecting and analyzing data. Operators can monitor multiple fields simultaneously from a standard Web browser or Internet-enabled mobile device. Personnel can be notified of faults and conditions automatically, even while away from a computer. Collected data is stored securely in a central database and is available through the same intuitive Web interface or exportable for use in third-party software. Other peripheral hardware can be integrated to provide a comprehensive solution.
Unico offers comprehensive status monitoring and reporting for wells controlled by Unico drives through multiple Apple iOS applications.
A comprehensive system for remotely collecting real-time production and oil-cut data to facilitate oilfield management and meet regulatory reporting requirements.
The 5100 series of motors are inverter-duty totally-enclosed, fan-cooled (TEFC) units. They are intended for operation from Unico AC drives in general-purpose applications up to 500 hp (375 kW).
The 5200 series of motors are inverter-duty totally-enclosed, non-ventilated (TENV) and drip-proof, force-ventilated (DPFV) units. They are intended for operation from Unico AC drives in high-performance applications up to 1,000 hp (750 kW).
The 5250 series of motors are drip-proof, force-ventilated (DPFV) units intended for operation from Unico DC drives in industrial applications up to 500 hp (375 kW).
Unico offers a variety of components that can be used in the integration of complete drive systems.
Variable-speed control, simple mechanics, and industry-leading control software in a compact, lightweight, unobtrusive solution with significant cost and performance advantages over traditional approaches.
An innovative approach to pumping that combines simple mechanics and industry-leading variable-speed well control in a compact, lightweight, unobtrusive solution with significant cost and performance advantages over traditional approaches.
An innovative approach to pumping that combines simple mechanics and industry-leading variable-speed well control in a compact, lightweight, unobtrusive solution with significant cost and performance advantages over traditional approaches.
Superior control of conventional, air-balanced, beam-balanced, phased-crank, Mark II, Reverse Mark, and Rotaflex artificial lifts. The drive integrates motor control, speed optimization, logic, pump fill control, and rod load control into a single, compact solution that increases production, improves energy efficiency, and enhances the reliability of both new and existing pumping systems.
Unico’s Progressing Cavity Pump (PCP) Drive provides a number of features specifically designed for operation of progressing cavity pumps. The drive combines motor and pump control into a single, compact package that increases production, improves energy efficiency, and enhances the reliability of both new and existing pumping systems.
Provides a number of features specifically designed for operation of electric submersible pumps. The drive combines motor and pump control into a single, compact package that increases production, improves energy efficiency, and enhances the reliability of both new and existing pumping systems.
Provides economical pump-off control of sucker-rod pumping systems. Using sophisticated modeling and control software and a powerful digital signal processor (DSP), the RPC controller computes surface and downhole conditions to best regulate the starting and stopping of the pump via a separate motor controller. Comprehensive monitoring and reporting capabilities provide real-time surface and downhole dynamometer plots, daily gauging, fault and event logging, a user-configurable data sampler, and more.
A family of packaged rodpump controller solutions for sucker-rod pumping (SRP) applications. From simple stand-alone start/stop control to the ultimate in variable speed well optimization, the VPC™ system lets you choose the appropriate level of sophistication on a well-bywell basis. The system is ideal for large fields of wells of varying maturity and requirements.
An efficient, cost-effective way for oil and gas producers to stay connected to the most critical aspects of daily operations. Using powerful hosted enterprise architecture, the GMC® system reduces time spent manually collecting and analyzing data. Operators can monitor multiple fields simultaneously from a standard Web browser or Internet-enabled mobile device. Personnel can be notified of faults and conditions automatically, even while away from a computer. Collected data is stored securely in a central database and is available through the same intuitive Web interface or exportable for use in third-party software. Other peripheral hardware can be integrated to provide a comprehensive solution.
Avoid regulatory compliance issues by remotely monitoring the state of tank hatches, gates, valves, and other mechanisms.
Unico's SRP Well Report provides well operators with one-button access to surface and downhole pump DynaCards and other data stored in a well powered by a Unico artificial-lift drive.
Unico offers comprehensive status monitoring and reporting for wells controlled by Unico drives through multiple Apple iOS applications.
Avoid regulatory compliance issues by remotely monitoring the state of tank hatches, gates, valves, and other mechanisms.
A comprehensive system for remotely collecting real-time production and oil-cut data to facilitate oilfield management and meet regulatory reporting requirements.
Read the current issue of Oil & Gas Automation Solutions for the latest on oilfield drives and artificial lift controls.
UNICO’s Test Stand Drive is an all-digital AC flux vector drive engineered for test stand and dynamometer applications. It consists of a UNICO 2000 Series Performance Vector Drive that incorporates software specifically designed for operating transmission test stands, engine dynamometers, engine test stands, component test stands, emissions dynamometers, and chassis dynamometers. The drive’s revolutionary technology and modular design make it the ideal choice where superior performance, flexibility, and ease of operation are desired.
The Unico 2460 battery cycling and DC testing system combines the 2460 family of dual-output DC power supplies with software specifically tailored for testing HEV battery packs, ultra- and supercapacitor packs, fuel cells, power electronic converters, and other devices.
Unico’s Battery Simulation System is an all-digital DC supply engineered specifically for such simulation applications as:
• Battery simulation
• Fuel cell simulation
• Battery load
• Fuel cell load
• DC supply
• DC load
• Resistance simulation
The Engine Dynamometer Drive from Unico is an all-digital AC flux vector drive engineered for dynamometer applications. The drive system consists of a Unico 2000 series Performance Vector Drive that incorporates software designed specifically for engine-testing dynamometer applications.
Unico’s Torque Pulse Simulation Drive is an all-digital AC flux vector drive engineered for engine-testing applications. The drive system consists of a Unico 2000 Series Performance Vector Drive that incorporates software designed specifically for simulating the torque pulses produced by internal combustion engines.
The LLC™ software module is engineered specifically for controlling leveler and straightener applications requiring loop control. The program is embedded within the controller of a UNICO drive, eliminating the need for an external control rack. When used in conjunction with a programmable controller, the drive forms a powerful automation work cell that can either stand alone or be easily integrated with other UNICO automation cells to build a complete control system for a metal-processing line. Embedded control reduces system complexity while taking full advantage of the exceptional performance, flexibility, and ease of use of UNICO drives.
The URC™ software module is engineered specifically for controlling unwind and rewind applications. The program is embedded within the controller of a UNICO drive, eliminating the need for an external control rack. When used in conjunction with a programmable controller, the drive forms a powerful automation work cell that can either stand alone or be easily integrated with other UNICO automation cells to build a complete control system for a metal-processing line. Embedded control reduces system complexity while taking full advantage of the exceptional performance, flexibility, and ease of use of UNICO drives.
The FTS™ software module is engineered specifically for controlling roll-feed applications. The program is embedded within the controller of a UNICO drive, eliminating the need for an external control rack. When used in conjunction with a programmable controller, the drive forms a powerful automation work cell that can either stand alone or be easily integrated with other UNICO automation cells to build a complete control system for a metal-processing line. Embedded control reduces system complexity while taking full advantage of the exceptional performance, flexibility, and ease of use of UNICO drives.
UNICO’s Embedded Flying Cutoff is application-specific software that controls a flying cutoff die accelerator drive system. The program is embedded within the controller of a drive, eliminating the need for an external control rack. When used in conjunction with a programmable controller, the drive forms a powerful automation work cell that can either stand alone or be easily integrated with other UNICO automation cells to build a complete control system. Embedded control reduces system complexity while taking full advantage of the exceptional performance, flexibility, and ease of use of the drive.
The PSC™ software module is engineered specifically for controlling press and shear
applications. The program is embedded within the controller of a UNICO drive,
eliminating the need for an external control rack. When used in conjunction with a
programmable controller, the drive forms a powerful automation work cell that
can either stand alone or be easily integrated with other UNICO automation cells
to build a complete control system. Embedded control reduces system complexity
while taking full advantage of the exceptional performance, flexibility, and ease
of use of UNICO drives.
The RCO™ software module is engineered specifically for controlling rotary-cutoff applications for the metal industry. The program is embedded within the controller of a UNICO drive, eliminating the need for an external control rack. When used in conjunction with a programmable controller, the drive forms a powerful automation work cell that can either stand alone or be easily integrated with other UNICO automation cells to build a complete control system for a metal-processing line. Embedded control reduces system complexity while taking full advantage of the exceptional performance, flexibility, and ease of use of UNICO drives.
The PIC™ software module is engineered specifically for controlling linear- or rotary-indexer applications. The program is embedded within the controller of a UNICO drive, eliminating the need for an external control rack. When used in conjunction with a programmable controller, the drive forms a powerful automation work cell that can either stand alone or be easily integrated with other UNICO automation cells to build a complete processing line control system. Embedded control reduces system complexity while taking full advantage of the exceptional performance, flexibility, and ease of use of UNICO drives.
Unico is the performance solution to process control problems in the metalforming, blanking, and stamping industries. Whether you need to breathe new life into an existing application or you have a new installation that demands superior controls, Unico drives and systems will help you get the most from your equipment.
The Unico STF® Servo Transfer Feed is a sophisticated multiaxis control system for in-press automation.The standard STF® system provides coordinated motion control for as many as 16 drives in four independent axes, while custom systems can control a virtually unlimited number of drives and axes. The servo system provides electronic line shafting that eliminates the large gearboxes and PTOs associated with mechanical feeds, resulting in smoother motion, greater flexibility and safety, and reduced mechanical maintenance.
The Profiler software module precisely synchronizes automation with a press or shear. The software is embedded directly within a Unico drive, eliminating the need for an external motion controller. The Profiler can control single- or multiaxis automation for in-press or between-press transfers and other press-following applications. It provides coordinated motion control for up to 32 drives in as many as 32 independent axes. Electronic line shafting eliminates the large gear boxes and PTOs associated with mechanical systems, resulting in smoother motion, greater flexibility, and reduced mechanical maintenance.
Unico is the performance solution to process control problems in the corrugated, pulp and paper, packaging, printing, and other converting industries. Whether you need to breath new life into an existing application or you have a new installation that demands superior controls, Unico drives and systems will help you get the most from your equipment.
Unico’s Smart Web AOC Shear Drive can be used alone or as part of a multidrive corrugator dry-end system. The drive controls the shear during automatic-orderchange (AOC) sequence and during scrap chop-out. The drive uses the same control algorithm as the Unico rotary cutoff knife drives and is therefore superior to typical drive packages.
Unico’s Smart Velocity Drive is a digital signal processor (DSP) based variablespeed drive with an embedded software block to control a double facer/backer. The program offers a number of programmable features that enable OEMs, integrators, and users to customize the functionality of the software to the application.
Unico’s Smart Velocity Drive is a digital signal processor (DSP) based variablespeed drive with an embedded software block to control a single facer. The program offers a number of programmable features that enable OEMs, integrators, and users to customize the functionality of the software to the application.
Unico’s Smart Velocity Drive is a digital signal processor (DSP) based variablespeed drive with an embedded software block to control a slitter/scorer. The program offers a number of programmable features that enable OEMs, integrators, and users to customize the functionality of the software to the application.
Unico’s Smart Rotary Cutoff (RCO) Drive is a digital signal processor (DSP) based variable-speed drive with an embedded software block to control a rotary cutoff. The program offers a number of programmable features that enable OEMs, integrators, and users to customize the functionality of the software to the application.
Unico’s stacker control provides superior automation for corrugated stackers. The system incorporates backstop positioning, board tracking, brush control, belt speed control, order and pile changes, as well as remote diagnostics via modem. The system includes variable-speed drives, a programmable controller, a Profibus remote I/O station, and a color human-machine interface (HMI).
Unico’s Smart Pull Roll Drive is a digital signal processor (DSP) based variablespeed drive with an embedded software block to control the infeed and exit pull rolls of a rotary cutoff. The program offers a number of programmable features that enable OEMs, integrators, and users to customize the functionality of the software to the application.
The Unico Dry-End Manager has been developed to optimize production processes on corrugator lines. All production parameters are transferred electronically or entered centrally at the Dry-End Manager, thus eliminating errors due to making manual entries at the machines.
For many users, retrofitting or modernizing their machines or complete lines is the solution for giving these investments a “second lifetime.” Though the mechanics are often in good condition, the electronics and drive engineering frequently require updating. Retrofits are therefore an increasingly viable option for the electrical portion of the system.
Unico’s high-performance sheeter control systems provide comprehensive solutions that yield optimal cut accuracy, throughput, and energy savings with paper and board applications.
The RDC™ drive controls a rotary die cutter for corrugated, paper, and other nonmetallic web applications. Specifically engineered die cutter application software embedded within the drive eliminates the need for an external controller. When used in conjunction with a programmable logic controller (PLC), the drive forms a powerful automation work cell that can be easily integrated with other Unico automation cells to build a complete processing line control system. The drive can also be configured to stand alone with discrete I/O and a dedicated HMI. Embedded control reduces system complexity while taking full advantage of the exceptional performance, flexibility, and ease of use of Unico drives.
The RPD™ drive controls a rotary printer for corrugated, paper, and other nonmetallic web applications. Specifically engineered printing application software embedded within the drive eliminates the need for an external controller. When used in conjunction with a programmable logic controller (PLC), the drive forms a powerful automation work cell that can be easily integrated with other Unico automation cells to build a complete processing line control system. The drive can also be configured to stand alone with discrete I/O and a dedicated HMI. Embedded control reduces system complexity while taking full advantage of the exceptional performance, flexibility, and ease of use of Unico drives.
The FTR™ drive is engineered specifically for controlling feed-to-register applications that use a sensor to detect a preprinted mark or mark pattern and index the web a settable feed length. Control software embedded within the the drive eliminates the need for an external control rack. When used in conjunction with a programmable controller, the drive forms a powerful automation work cell that can either stand alone or be easily integrated with other Unico automation cells to build a complete control system for a web-processing line. Embedded control reduces system complexity while taking full advantage of the exceptional performance, flexibility, and ease of use of Unico drives.
Unico’s drive system for positioning a transversal scorer incorporates the following features:
• Positions the servo motors using modern digital control algorithms
• Electronically synchronizes the upper and lower scorer positions
• Measures material movement using a measuring wheel and pulse generator
• Measures scorer position using a reference switch in conjunction with a
pulse generator at the motor shaft
• Provides order and system data input by means of an HMI with integrated
PC installed in the operators’ desk
• Indicates system status by means of the HMI
• PLC for system control and order data limiting
The 5100 series of motors are inverter-duty totally-enclosed, fan-cooled (TEFC) units. They are intended for operation from Unico AC drives in general-purpose applications up to 500 hp (375 kW).